Most drivers treat a rideshare inspection as paperwork. The ones who pass treat it as preparation. A fail does not just mean a second visit. It means days where the car sits in a driveway in Canning Vale or Joondalup instead of being on the road, plus a repair list you did not plan for. Many of the items on the checklist are visible from the kerb, including a brake light that has stopped working, a tyre under the tread limit, or a chip in the swept area of the windscreen. This guide sets out what gets checked, how to book, the seven steps of the process, and the pre-check that keeps you driving.
Quick answer: A rideshare inspection is a safety and roadworthiness check that confirms a vehicle is fit to carry paying passengers. In Perth WA, drivers book an inspection at an authorised station, present the vehicle, and receive a report listing every item that passes or fails.
Key takeaways
- A rideshare inspection checks the same core safety systems as a roadworthy check, including brakes, tyres, steering, suspension, lights, seatbelts and windscreen condition.
For the full picture, read our main guide to vehicle inspection checklist.
- Two separate sets of requirements apply to most drivers: the state regulator’s vehicle standards and the rideshare platform’s own vehicle rules. They do not always run on the same calendar.
- A twenty minute pre-check in your own driveway clears the most common avoidable fails before an inspector ever sees the car.
- The inspection produces a written report. Where the vehicle passes, that report becomes the certificate you hand to your platform.
- Buying a car specifically to drive rideshare is a different problem from renewing on an existing one, and it needs a different inspection.
What a rideshare inspection actually checks
A rideshare inspection covers the systems that keep a loaded car stopping, steering and being seen. That means the brake system, including pads, discs, lines and the handbrake. It means tyres, where tread depth, sidewall damage, uneven wear and matching sizes across an axle all come into it. It means steering and suspension play, wheel bearings, and the state of bushes that have taken a decade of Perth WA potholes.
Lights get more attention than drivers expect. Headlights, indicators, brake lights, reversing lights, number plate lights and hazard lights all need to be working and correctly coloured. Seatbelts must latch, retract and show no fraying. The windscreen must be clear of cracks and chips in the driver’s line of sight. Wipers must actually clear water rather than smear it.
Body and interior condition matter more for rideshare than for a private car. Passenger doors need to open and close properly, child locks need to function, seats need to be secure, and obvious panel damage or rust can be marked down. Exhaust leaks, fluid leaks and warning lights left illuminated on the dash are all recorded. If you want the fuller picture of what inspectors flag most often, our guide to common safety concerns during a car inspection in Perth WA goes item by item.
The twenty minute pre-check you can do before you book
Do this in your driveway before you book anything. It costs you nothing but time, and it catches most of the avoidable issues.
- Lights. Reverse up to a wall or shop window at dusk. Run every light, including brake lights, with a helper or by watching the reflection. Replace any globe that is out.
- Tyres. Check tread across the full width, not just the middle. Look for cracking on the sidewalls and check the spare if the vehicle carries one.
- Windscreen. Sit in the driver’s seat and look for chips or cracks directly in your field of view. Small chips can sometimes be repaired before they spread.
- Wipers and washers. Run them on a wet screen. Streaking or chatter means new blades.
- Seatbelts. Pull each one out fully, check for fraying, then let it retract. Every belt, not just the front two.
- Dash warning lights. Start the car and watch what stays lit. An illuminated fault light is a red flag to any inspector.
- Doors, mirrors and horn. Open and close every passenger door from inside and out. Check both mirrors are secure and the horn works.
If something on that list is already showing a symptom, our guide on warning signs that you need a vehicle inspection will tell you whether it is a quick fix or something to get looked at first.
How to book an Uber inspection
Book an Uber inspection by choosing an inspection station that handles on-demand passenger transport work, picking a date that sits comfortably ahead of your current certificate expiry, and bringing your registration papers and driver details on the day. In Perth WA, you can book an inspection online with us and choose a time that fits around your driving.
Two booking habits separate the drivers who stay on the road from the ones who lose days. The first is booking early rather than on the deadline, which leaves room for repairs and a re-check without a gap in your authorisation. The second is fixing the obvious items before the appointment rather than treating the inspection as a diagnostic. An inspection tells you what is wrong. It is not the place to discover a worn tyre or a dead globe for the first time. Our ten rideshare vehicle maintenance tips cover what to check between inspections.
What are the 7 steps of the inspection process?
Most inspection processes follow the same seven steps: booking, document and identification checks, an exterior and body walk-around, tyres, wheels and brakes, an under-bonnet and underbody check, an interior and safety equipment check, then the written report that records each item as a pass or a fail.
Here is what each step involves in practice.
- Booking. You select a date and confirm the vehicle details so the right checklist is prepared.
- Identification. The inspector confirms the registration, VIN and compliance plate match the paperwork you have brought.
- Exterior and body. A walk-around covering panels, glass, mirrors, lights, doors and visible damage.
- Tyres, wheels and brakes. Tread depth, wear pattern, wheel security, brake components and handbrake effectiveness.
- Under bonnet and underbody. Fluid leaks, hoses, belts, steering and suspension components, exhaust integrity.
- Interior and safety equipment. Seatbelts, seats, horn, wipers, demister, warning lights and passenger access.
- Report. Every item is recorded. A clear report is your certificate. A fail lists exactly what needs attention and what has to be re-checked.
Our inspection station is fully equipped with advanced inspection equipment to ensure that every item on the checklist gets a proper assessment, which matters most at steps four and five where a visual glance is not enough.
Which inspection do you actually need?
Drivers routinely book the wrong one. This table sorts it out.
| Inspection type | What it confirms | Who usually asks for it | What you walk away with |
| Pre-purchase inspection | The condition of a car you do not own yet | You, before you buy | A written report on faults, wear and likely upcoming work |
| Rideshare safety inspection | The vehicle is roadworthy and fit to carry passengers | The regulator and your rideshare platform | An inspection report, and a certificate where it passes |
| Annual rideshare re-check | The vehicle still meets the standard a year on | Your platform and the regulator | An updated report and certificate |
| Post-repair defect check | The items that failed previously have been fixed | Whoever issued the original fail | A clear report on the previously failed items |
Frequently Asked Questions
Where can I get a car inspection in Adelaide SA for driving an Uber?
We are based in Perth WA, so we cannot carry out inspections in Adelaide SA. Drivers in South Australia need to book with an authorised inspection station in their own state that handles on-demand passenger transport work. If you are driving in Perth WA instead, we can inspect your vehicle and issue a written report covering every checklist item.
Where can I get my car inspected in Perth WA for Uber?
You can book your Uber inspection with us at our Perth WA inspection station, which is fully equipped with advanced inspection equipment. Choose a station that handles on-demand passenger transport work, then pick a date that sits comfortably ahead of your current certificate expiry. Bring your registration papers and driver details on the day.
How to book an Uber inspection?
Book an Uber inspection by selecting an inspection station that handles on-demand passenger transport work, choosing a date ahead of your certificate expiry, and bringing your registration papers and driver details. You can book online with us and pick a time that fits around your driving. Booking early leaves room for repairs and a re-check.
What are the 7 steps of the inspection process?
The seven steps are booking, document and identification checks, an exterior and body walk-around, tyres, wheels and brakes, an under-bonnet and underbody check, an interior and safety equipment check, then the written report. Each item is recorded as a pass or fail, and a fail lists exactly what needs attention and re-checking.
What does a rideshare inspection check on my vehicle?
A rideshare inspection checks the systems that keep a loaded car stopping, steering and being seen, including brakes, tyres, steering, suspension, lights, seatbelts and windscreen condition. Body and interior items matter too, so passenger doors, child locks, seat security, panel damage, leaks and illuminated dash warning lights are all recorded.
How do I book an Uber vehicle inspection in Perth WA?
Book online with us and choose a time that fits around your driving, then bring your registration papers and driver details to the appointment. We recommend booking early rather than on the deadline so there is room for repairs and a re-check without a gap in your authorisation.
